A Fresh Finish That Lasts All Season
A pool finish takes a beating. Chlorine, UV, freeze–thaw cycles and heavy swimmer traffic all break paint down, and chalking, fading, peeling or blistering do more than look tired — they make surfaces harder to keep clean and can hide cracks that need attention.
ClearPath prepares and repaints indoor and outdoor pools for strata communities, hotels, fitness clubs, schools and municipal aquatic facilities across the Lower Mainland. We plan the work around your shutdown window, choose coatings that suit your existing surface, and finish with the markings and deck treatments that keep swimmers safe.
Pool Painting Services
Surface Preparation
Pressure washing, etching and sanding so the new coating bonds properly and lasts.
Crack & Surface Repair
Cracks, chips and spalled areas patched before the first coat goes on.
Pool Repainting
Epoxy, acrylic and rubber-based pool coatings matched to your existing finish.
Lane Lines & Targets
Lane lines, T-marks and wall targets laid out accurately for lessons and competition.
Depth & Safety Markings
Depth markers, no-diving symbols, step edges and warning lines that swimmers can see.
Non-Slip Deck Coatings
Slip-resistant finishes for pool decks, change-room entrances, stairs and ramps.
Spas, Wading & Splash Pools
Hot tubs, children’s pools and splash-pad surfaces prepared and recoated.
Pre-Season Touch-Ups
Inspections and touch-ups before opening so the finish looks sharp all season.
How a Pool Project Runs
- Site InspectionWe check the existing coating, surface condition and markings, and confirm your timeline.
- Coating Plan & QuoteYou get a clear scope: preparation, coating system, colours, markings and cure time.
- Prep & PaintSurfaces are cleaned, etched and repaired, then coated in the right conditions for a lasting bond.
- Cure & Hand OverLanes and depths are marked, the coating cures fully, and the pool is ready to fill.
Plan around your shutdownPool coatings need a dry surface, suitable temperatures and full cure time before refilling. Spring pre-season work and fall closures book up quickly, so reserve your window early.
Why Facility Managers Choose ClearPath
- Coatings matched to your existing surface
- Thorough preparation for a lasting finish
- Accurate lane and depth markings
- Work scheduled around your shutdown
- Fully insured & WorkSafeBC compliant
- One contractor for pools, lots and grounds
Pools We Paint
- Strata & condo pools
- Hotels & resorts
- Fitness & aquatic centres
- Schools & universities
- Municipal pools
- Spas & splash parks
Frequently Asked Questions
It depends on the coating and how heavily the pool is used. Acrylic finishes are usually refreshed every few years, while properly applied epoxy systems last considerably longer. We will assess your current finish and recommend the right interval.
Usually, as long as the new coating is compatible. Epoxy, acrylic and rubber-based paints do not always mix, so we identify what is on the surface first and prepare it accordingly.
That depends on the pool size, the repairs needed, the weather and the coating’s cure time. We give you a firm schedule before work starts so you can plan notices and reopening.
Yes. Lane lines, targets and depth markers can be refreshed on their own when the rest of the finish is still in good shape.
